ABS Indicator Light (ABS)
(FES125A/150A)
Normally, this light comes on when the igni-
tion switch is turned ON and goes off after
you ride the scooter at speed above 10 km/h
(6 mph). If there is an ABS problem, the indi-
cator light comes on and remains on. The
ABS system does not operate when the ABS
indicator light is on.
If the ABS indicator light comes on while
riding, stop the scooter in a safe place and
turn off the engine.
Turn the ignition switch ON again. The light
should come on, and go off after you ride
the scooter at speeds above 30 km/h (19
mph). If it does not go off, ABS is not
functioning, but the brakes still work the
Combined Brake System and provide
normal stopping ability. However, you
should have the system checked by your
Honda dealer as soon as possible.
32
All manuals and user guides at all-guides.com
The ABS indicator light may come on if you
turn the rear wheel while the scooter is
upright on the stand. This is normal. Turn
the ignition switch OFF, then turn it ON. The
indicator should come on and then go off
after you run the scooter above 30 km/h (19
mph).