Publicidad
Idiomas disponibles
Idiomas disponibles
5. Install the oil strainer screen, spring and
drain plug.
Oil Drain Plug Torque:
20 N•m (2.0 kgf•m, 14 lbf•ft)
6. Fill the crankcase with the recommended
grade oil; approximately:
l
0,9
(1.0 US qt, 0.8 lmp qt).
7. Install the oil filler cap/dipstick.
8. Start the engine and let it idle for 2-3
minutes.
9. Stop the engine and check that the oil
level is at the upper level mark on the oil
filler cap/dipstick with the scooter upright
on firm, level ground. Make sure there are
no oil leaks.
All manuals and user guides at all-guides.com
95
Publicidad
