Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
Clean your scooter regularly to protect the
surface finishes and inspect for damage,
wear, and oil, coolant or brake fluid leakage.
Avoid cleaning products that are not
specifically designed for scooter or
automobile surfaces.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint, and plastic on your scooter.
If the scooter is still warm from recent
operation give the engine and exhaust
system time to cool off.
We recommend avoiding the use of high
pressure water spray (typical in coin-
operated car washes).
NOTICE
High pressure water (or air) can damage
certain parts of the scooter.
118
All manuals and user guides at all-guides.com
Washing the scooter
1. Rinse the scooter thoroughly with cool
water to remove loose dirt.
2. Clean the scooter with a sponge or soft
cloth using cool water.
Avoid directing water to muffler outlets
and electrical parts.
3. Clean the plastic parts using a cloth or
sponge dampened with a solution of mild
detergent and water. Rub the soiled area
gently rinsing it frequently with fresh water.
Take care to keep brake fluid or chemical
solvents off the scooter.
They will damage the plastic and painted
surfaces.
The inside of the headlight lens may be
clouded immediately after washing the
scooter. Moisture condensation inside the
headlight lens will disappear gradually by
lighting the headlight in high beam. Run
the engine while keeping the headlight on.
Publicidad
