Fan Mode (Fan) - Vaillant VAI 6-025 WN Manual De Usuario

Legend
1 MODE button
2 - / + buttons
3 DRY mode indicator
In order to activate:
With the unit switched on (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig. 7.9 Operation modes.
• Select the dehumidifying mode (DRY).
• Press the - / + buttons to select the temperature setting.
When pressing the - / + buttons, the temperature
configuration will increase or decrease by 1ºC.
When the fan is set to DRY mode, the air conditioner selects
the low fan speed to make the most effective mode.
NOTE:
i
In dehumidifying mode, prolonged use of the unit
under conditions of considerable air humidity can
cause drops of water to fall from the outlet louvres.
VAI6-WN-U_EN - 06/14 - Vaillant
OPERATING INSTRUCTIONS
7.5.4

Fan mode (FAN)

In fan mode (FAN) the SLEEP function is disabled.
3
2
Fig. 7.10 Fan selection mode.
Legend
1 MODE button
2 FAN button
3 FAN mode indicator
In order to activate the fan mode (FAN):
With the unit switched on (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig. 7.11 Operation modes.
• Select the fan operation mode (FAN).
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed will be
modified as shown in Figure 7.12.
1
EN
- 11 -