Epson M1100 Manual De Instrucciones página 10

■
Do not use aerosol products that contain flammable gases inside or around the product. Doing
so may cause fire.
■
Except as specifically explained in your documentation, do not attempt to disassemble or
service any part of the product yourself.
■
Unplug the product and refer servicing to qualified service personnel under the following
conditions: if the power cord or plug is damaged; if liquid has entered the product; if the
product has been dropped or the case damaged; if the product does not operate normally or
exhibits a distinct change in performance. Adjust only those controls that are covered by the
operating instructions.
■
Before transporting the product, make sure that the print head is in the home (far right)
position. If it is not, press the
position.
■
When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside
down; otherwise ink may leak.
Ink Safety Instructions
■
This product was originally designed to work with genuine Epson inks. Your product may not
function properly if you use other types of ink and may affect Epson's warranty.
■
Use one of the included ink bottles for printer setup. The ink bottles are not for resale. The
printer ships with full ink bottles and part of the ink from the first bottle is used to charge the
print head. Yields vary considerably based on print jobs, print settings, paper type, frequency of
use, and temperature.
■
The ink bottle that is used for initial product setup has a lower yield due to the ink charging
process. This process is carried out the first time you turn on the printer and guarantees better
performance. Do not load paper before refilling the ink tank.
■
Keep ink bottles and the ink tank unit out of the reach of children. Do not allow children to
drink from or handle the ink bottles and bottle caps.
■
Do not tilt or shake an ink bottle after removing its cap; otherwise, ink may leak.
■
Do not squeeze the ink bottles.
■
Visually check the ink level in the ink tank to confirm the actual ink level. If the ink level is
below the lower line on the ink tank, refill the ink soon. Continued use of the product when
the ink is below the lower line could damage the printer.
■
To obtain optimum printing results, do not maintain a low ink level for extended periods of
time and be sure to refill the ink tank to the upper line at least once a year
■
Use ink bottles with the correct part number for this product.
■
The use of non-genuine ink may cause damage that is not covered by Epson's warranty, and
under certain circumstances, may cause erratic product behavior.
■
Be careful not to touch any ink when you handle the ink tank, ink tank cap, and opened ink
bottles or ink bottle caps. If ink gets on your skin, wash the area thoroughly with soap and
water. If ink gets into your eyes, flush them with water. If discomfort or vision problems remain
after a thorough flushing, see a doctor immediately. If ink gets into your mouth, spit it out
immediately and see a doctor right away.
10
Important Safety Instructions
ink button for at least five seconds to return it to the home