Sony XR-1950 Manual De Instrucciones página 5

Memorizing only the
desired stations
You can store up to 6 stations on each band (18
for FM1, FM2 and FM3, 12 for AM1 and AM2)
in order of your choice.
1
Press (TUNER) repeatedly to select the
desired band.
2
Press either side of (SEEK/MANU) to tune
in the station that you want to store on
the number button.
3
Keep the desired number button ((1) to
(6)) pressed for two seconds until you
hear a beep tones.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Actual total number:
Receiving the memorized
stations
1
Press (TUNER) repeatedly to select the
desired band.
2
Press the number button ((1) to (6))
momentarily where the desired station is
stored.
Tip
Press (A.MEM/M.SCAN) momentarily to receive in order
the stations stored in the memory (Memory scan
Function).
If you cannot tune in a preset
station
Press either side of (SEEK/MANU)
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/MANU)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SENS) momentarily until "LCL" (local seek mode)
appears in the display. Only the stations with relatively
strong signals will be tuned on.
Tip
If you know the frequency of the station you want to listen
to, press and hold either side of (SEEK/MANU) until the
desired frequency appears (manual tuning).
If FM stereo reception is poor
— Monaural mode
Press (SENS) momentarily until "MONO"
appears.
The sound improves, but it will becomes
monaural ("STEREO" disappears).
Sony XR-1950 (E,S,C) 3-856-689-11 (2)
EN
5