Publicidad
Idiomas disponibles
Idiomas disponibles
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance and
fader.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
To adjust bass or treble, press (SEL)
repeatedly until "BAS" or "TRE" flashes.
BAS (bass) n TRE (treble)
n BAL (balance) n FAD (fader)
n VOL (volume)
2
EN
Adjust the selected item by pressing (+)
or (–).
Adjust within three seconds after selecting.
(After three seconds the buttons work as
volume control buttons.)
Changing the sound and
display settings
Enjoying bass and treble even at
low volume — Loudness
Bass and treble will be reinforced.
Press (LOUD) .
"LOUD" appears.
To cancel, press (LOUD) again.
Turn off the beeps
Press (6) while pressing (SEL).
To obtain the beeps again, press these
buttons again.
6
Actual total number:
Additional
Information
Precautions
• If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.
• If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
• If no sound comes from the speakers of a
2-speaker system, set the fader control to the
center position.
• When the tape is played back for a long
period, the cassette shell may become warm
because of the built-in power amplifier.
However, this is not a sign of a malfunction.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
To maintain high quality sound
If you have drink holders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio. Sugary
residues on this unit or cassette tapes may
contaminate the playback heads, reduce the
sound quality, or prevent sound reproduction
altogether.
Cassette cleaning kits cannot remove sugar
from the tape heads.
Sony XR-1950 (E,S,C) 3-856-689-11 (2)
Publicidad
