Descargar Imprimir esta página

EAS ELECTRIC EMW812E2 Manual De Usuario página 37

Publicidad

Idiomas disponibles

Idiomas disponibles

3. INSTALL WASHING MACHINE
UNPACKING THE WASHING MACHINE
Unpack your washing machine and check if there is any damage during the
transportation. Also, make sure that all the items (as shown in Page 5) in the
attached bag are received.
If there is any damage to the washing machine during the transportation, or any
item is missing, please contact the local dealer immediately.
DISPOSE THE PACKING MATERIALS
The packing materials of this machine may be dangerous to kids. Please
dispose them properly and avoid easy touch by kids. Please dispose the
related packing materials according to the relevant local regulations. Please
do not throw the packing materials away together with the other daily living
rubbishes.
REMOVE TRANSPORT BOLTS
Before using this washing machine, transport bolts
must be removed from the backside of this machine.
Please take the following steps to remove the bolts:
1.Loosen all bolts with spanner and then remove them
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
SELECT THE LOCATION
Before installing the washing machine, the location characterized as
follows shall be selected:
• Rigid, dry, and level surface (if not level, please make it level with
reference to the following figure "Adjust Leg")
• Avoid direct sunlight
• Sufficient ventilation
• Room temperature is above 0 C
• Keep far away from the heat resources such as coal or gas.
Make sure that the washing machine will not stand on power cord.
Do not install the washing machine on the carpet floor.
V. 2
37

Publicidad

loading

Este manual también es adecuado para:

Emw580e2Emw610e2Emw712e2