Ecoflam 3142669 Descripción Del Producto página 15

Start up
- Adjustment of pump pressure
420010576400
D
Adjustment of fuel thermostats
The working resistor thermostat must be
set to 120 °C, while the safety one to 160
°C. Said adjustments can be slightly modi-
fied following the type of fuel and particu-
lar uses.
A - Safety thermostat (160° C).
B - Working thermostat (120° C).
C - Levelling thermostat (130° C).
D - Heavy oil min. temp. thermostat
(90° C).
WARNING: For a correct working of the
pump, verify what follows:
Pump : SUNTEC E4NC 1069 / SUNTEC
E6NC 1069
Oil temperature at the pump: Max. 120 °C
Maximum allowable pressures: Max. 3,5
bar on inlet
Pocket for levelling thermostat
Pocket for Pocket for sa-
thermometer
fety thermostat
Pocket for wor- Pocket for min. temp.
king thermostat thermostat
15
EN