Tabla De Contenido - Sharp FU-P60S-E Manual De Uso

ENGLISH
FEATURES
Plasmacluster Ion Control
The unit controls the ratio of negative ions
and positive ions depending on the con-
dition of the room.
• Clean Mode
Approximately the same numbers of posi-
tive and negative ions are discharged.
This mode is effective for reducing some
airborne mold.
• Ion Control Mode
Plenty of negative ions exist in natural
surroundings such as waterfalls or forests.
In this mode, negative ions will be re-
leased in an increased rate, in order to
bring the room air close to this natural
environment.
• AUTO Plasmacluster Ion Mode
The unit will switch between Clean Mode
and Ion Control Mode automatically de-
pending on the amount of impurities in the
air detected by the dust and odour sen-
sors.
• SENTINEL Operation Mode
The "SENTINEL" function detects any air
enviornment that is favourable for
activation of mold, virus and allergen
using its 4 sensors for dust, odour,
temperature and humidity, and it releases
Plasmacluster Ions to create an
environment that controls the activity of
airborne microbes.
• Filters
1) Pre-Filter
It collects large particles.
2) Washable Active Carbon Filter
Absorbs odour elements.
Washable to maintain optimum
deodrization performance.
3) HEPA (High Efficiency
Particulate Air) Filter with
Microbial Control Filter
High-efficiency particle collection in-
cluding pollen and dust.
Thank you for purchasing the SHARP Air Purifier. Please read this manual carefully for the correct
usage information. Before using this product, be sure to read the section: "Important Safety In-
structions."
After reading this manual, retain it in a convenient location for future reference.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .... E-2
• WARNING ....................................................
• CAUTIONS CONCERNING OPERATION ...
• REMOTE CONTROL LIMITATIONS ............
• INSTALLATION GUIDELINES .....................
• FILTER GUIDELINES ..................................
PART NAMES .......................................... E-4
• MAIN UNIT DISPLAY ...................................
• INCLUDED ...................................................
• BACK ...........................................................
PREPARATION........................................ E-5
• INSERTING BATTERIES
IN THE REMOTE CONTROL ......................
• REMOTE CONTROL USE ...........................
• FILTER INSTALLATION ...............................
OPERATION ............................................ E-8
• MAIN UNIT OPERATION .............................
• REMOTE CONTROL OPERATION ..........
CARE AND MAINTENANCE ................. E-11
• MAIN UNIT .................................................
• ODOUR SENSOR / DUST SENSOR .........
• FILTER CLEANING ....................................
• WASHABLE ACTIVE CARBON
FILTER CARE ...........................................
• FILTER REPLACEMENT
GUIDELINES ............................................
TROUBLESHOOTING ........................... E-14
SPECIFICATIONS ................................. E-15
NFORMATION ON PROPER DISPOSAL .... E-15
E-1
E-2
E-2
E-2
E-3
E-3
E-4
E-4
E-4
E-5
E-5
E-6
E-8
E-10
E-11
E-11
E-11
E-12
E-13