Keypad (HMI) and Basic Programming
The parameters P1011 to P1018 define the speed reference value when the Multispeed is
operating.
The parameters related to this application are:
P1010 – Version of the Multispeed Application
Adjustable
0.00 to 10.00
Range:
Properties:
ro
Access groups
SPLC
via HMI:
Description:
Read only parameter that presents the software version of the multispeed application
developed for the SoftPLC function of the CFW700.
P1011 – Multispeed Reference 1
Adjustable
0 to 18000 rpm
Range:
Properties:
ro
Access groups
SPLC
via HMI:
Description:
Sets the speed reference 1 for the multispeed application.
P1012 – Multispeed Reference 2
Adjustable
0 to 18000 rpm
Range:
Properties:
-
Access groups
SPLC
via HMI:
Description:
Sets the speed reference 2 for the multispeed application.
P1013 – Multispeed Reference 3
Adjustable
0 to 18000 rpm
Range:
Properties:
-
Access groups
SPLC
via HMI:
Description:
Sets the speed reference 3 for the multispeed application.
34 | CFW700
Factory
-
Setting:
Factory
90 rpm
Setting:
Factory
300 rpm
Setting:
Factory
600 rpm
Setting: