Eu Declaration Of Conformity - Titan M-4 Manual De Usuario

Replacing/Removing the Filter
1. Loosen the fitting (1) with a wrench and pull the filter housing (2) and
filter (3) out of the gun.
2. Take the old filter out of the filter housing.
3. Insert the new filter, with the narrow end facing upwards, into the filter
housing.
4. Place the handle seal into the gun head with the flat side of the seal
toward the gun head.
5. Insert the filter housing (3) back into the gun and screw it securely into
place.

EU Declaration of conformity

We declare under sole responsibility that this product conforms to the
following relevant stipulations:
2006/42/EC, 2014/34/EU, 2011/65/EU
Applied harmonised norms:
EN ISO 12100, EN 1953, EN ISO 80079-36
II 2G X
The EU declaration of conformity is enclosed with the product.
If required, it can be re-ordered using order number 2389342.
12
Flat side of
handle seal
(toward gun head)
3
4
Bevelled side of
handle seal
(toward handle)
2
1
M-4/M-8
GB