Stihl RMA 248.0 Manual De Instrucciones página 31

7 Assembling the Lawn Mower
► Press cable clip (9) onto handlebar (6) so the
pin of the cable clip engages in the aperture
on the underside of the handlebar.
Handlebar (6) must not be dismantled again.
7.2 Folding Up and Folding the
Handlebar
7.2.1 Folding Up the Handlebar
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
► Fold up handlebar (1), ensuring that cable (2)
is not trapped.
► Firmly tighten star grip nuts (3).
Handlebar (1) is firmly attached to the lawn
mower.
7.2.2 Folding the Handlebar
The handlebar can be folded for space-saving
transport or storage.
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
0478-131-9861-B
► Hold handlebar (1) and loosen star grip
nuts (2).
► Fold down handlebar (1) forwards.
7.3 Assembling, Attaching and
Detaching the Grass Catcher
Box
7.3.1 Assembling the Grass Catcher Box
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
Tabs (3) and guides (5) must be located on
the inside. Tabs (3) must be level with open‐
ings (4).
► Press tabs (3) into openings (4) one after the
other from back to front.
Tabs (3) engage audibly.
7.3.2 Attaching the Grass Catcher Box
► Stop the engine.
► Place the lawn mower on a level surface.
English
31