DKN technology DUNLOP 4-EM Manual Del Usuario página 21

Operating Instructions Computer
Switch on
After connecting the power adapter and/or after
pressing any button the display will be blinking for
some seconds showing the figure 78, then will enter
the calendar setting mode. Use up/down knob to
enter the year, confirm pushing the knob (ENTER).
Follow same procedure to enter month, day and
clock.
Next the display shows MANUAL, PROGRAM,
USER, TARGET H.R. or WATT. Use UP/DOWN to
select the appropriate program. Press "ENTER" to
confirm selection.
Function buttons
ENTER Press to select any function to be
displayed on the main screen.
To start or stop the exercise
ST/STOP
program.
Press this button for recovery
RECOVERY
function: After exercising, while the
LCD is still active, press recovery
button, and hold both sensors (or
wear the chest transmitter) The
computer will run a time down for 60
seconds, after which your recovery
rate will be displayed, grades 1 up to
6. Level 1 featuring fast recovery,
level 6 slow recovery.
RESET Press for 1 second to clear last single
entry or one single display.
TOTAL RESET To clear the display and reset all
data. Press for 3 seconds to clear all
data, the display will show 'U1'.
UP To select upward function.
DOWN To select downward function
Function description
Time:
Displays time function by pressing the ENTER button
(marking – flashes in "TIME" lcd window). For
countdown enter rate in minutes by turning the
up/down button.
Distance:
Displays distance function by pressing the ENTER
button (marking – flashes in "DISTANCE" lcd
window). For countdown enter rate in km by turning
the up/down button.
Calories:
Displays calorieburn function by pressing the ENTER
button (marking – flashes in "CALORIE" lcd window).
For countdown enter rate by turning the up/down
button.
Speed:
Displays speed function by turning the ENTER button
(marking – flashes in "SPEED" lcd window).