HPA-Faip M 928 ROYAL Uso Y Mantenimiento página 66

MAIN OPERATING PARTS
WARNING
Get to know your machine: the best way to prevent
accidents and obtain top performance is to get to
know exactly how it works. Learn the function and
location of all the controls. Check carefully that
each of the controls operates properly. To avoid
any risk of accidents and injuries, the machine
must be installed and operated correctly and
serviced regularly.
The machine main operating parts are shown
in fig. 10.
1 Body
2 Centring handle (device for clamping the
wheel to the turntable).
3 Movable head for tyre mounting/demounting.
4 Tilting column.
5 Demounting tool control cylinder.
6a Cylinder for movable head descent.
7 Console.
8 Wheel resting and centring unit.
9 Clamping control handle.
10 Bead breaking unit.
11 Bead breaker disc.
12 Grease tank.
13 Tilting column pedal.
14 Inflation pedal.
15 Rotation pedal.
17 Pressure gauge for reading inflation pressure.
18 Filter Regulator + Lubricator Unit (regulates
pressure, filters, removes humidity of and
lubricates the compressed air supplied).
19 Data plate.
20 Deflation push-button
21 Control valve for upper bead breaking arm
ascent descent.
22 Doyfe inflator chuck.
23 Control valve for lower bead breaking arm
ascent descent.
24 Control valve for locking dual-position bead
breaker supports.
25 Control push-button for upper bead breaker
disc penetration.
(the bead breaker disc is activated by pressing
this push-button; every time the lever 21 is
operated upwards –the bead breaker disc
moves away from the rim-, the bead breaker
disc is deactivated).
66
26 Control push-button for lower bead breaker
disc penetration.
(the bead breaker disc is activated by pressing
this push-button; every time the lever 23 is
operated downwards –the bead breaker disc
moves away from the rim-, the bead breaker
disc is deactivated).
27 Control push-button for bead breaking unit
unlocking and opening.
28 Head control lever.
29 Wheel lifter pedal (optional).
30 Vertical arm ascent/descent push-button:
A: ascent B: descent C: locked
Key to danger/warning decals
Risk of crushing.
Never place any part of the body, particularly
your hands, between the bead breaker disc or
the demounting/mounting tools and the wheel.
Never place your hand between the turntable
and the wheel.
Risk of crushing.
Never place any part of the body between the
wheel lifter and any other component with which
it comes into contact.
NEVER stand behind the machi-
ne.
Only one operator may operate and use the
machine.
NEVER stand or walk close to the machine when
it is in operation. The tool-holder arm and the bead
breaking unit have a lateral opening.
NEVER stand behind the ma-
chine.
User Manual M 928 ROYAL