HPA-Faip M 928 ROYAL Uso Y Mantenimiento página 83

- Fit the cap to the valve to protect its internal
mechanism from dust and ensure an airtight
seal.
- Remove and unload the wheel as described
in steps 11-12 of the "TYRE MOUNTING"
section.
Inflating tube-type tyres
- Make sure that the wheel on which the tyre has
been mounted is firmly secured to the turntable
using the centring handle 1 fig. 34. Also make
sure that the tool-carrying head and the bead
breaking unit are well clear of the working area,
if possible in a rest position.
- Connect the Doyfe inflator chuck 22 fig. 34 on
the air hose to the air chamber valve stem, after
removing the cap. Inflate the tyre by pressing
the corresponding Pedal 14 fig. 34 at short
periods of time.
The inner tube gradually expands inside the
tyre. As this happens, push in the inner tube
valve to let out the air left between the tube
and the tyre; this prevents deflation and any
possible damage to the tube.
- Inflate, taking utmost care that the pressure
shown on the Pressure gauge display 17
fig. 34 NEVER exceeds the pressure levels
recommended by the tyre producer.
- Fit the cap to the valve to protect its internal
mechanism from dust and ensure an airtight
seal.
- Remove and unload the wheel as described
in steps 11-12 of the "TYRE MOUNTING"
section.
User Manual M 928 ROYAL
1
14
17
20
22
34
83