probst HVZ-LIGHT Instrucciones De Uso página 68

Adjustments
5.4 Adjusting the gripping depth
5.4.1 Laying side
Adjust the gripping depth (laying side) so, that the
steel-lamellas are gripping in the lower ⅓ of the stone
layer (see Fig. 16).
Fig. 16
51400035
With extremely large stone layers it recommends to
adjust the gripping depth a little lower, so that the steel-
lamellas grip in the lowest range of the stone layer.
Otherwise it exist the danger that the stone layer breaks
out.
⅓
J
¼
⅓
Adjust the distance to ~ 100 – 150 mm from the centre of
the gripping depth adjustment to the outer edge of the
stone layer.
23 / 35
Fig. 17
Fig. 18
GB