probst HVZ-LIGHT Instrucciones De Uso página 69

Adjustments
5.4.2 Machine side
Adjust the gripping depth (machine side) so, that the
steel-lamellas are gripping in the ½ of the stone
layer (see Fig. 20).
Example: with stone layer breadth of 800 mm
→ 170 mm
The device (HVZ-LIGHT) is adjusted optimally, when while gripping process and while main clamping is open, the
steel-lamellas (machine side) contact the stone layer and the steel-lamellas (laying side) have a distance to the stone
layer of about 100 - 150 mm (Fig. 21
Fig. 21
51400035
Fig. 19
).
With extremely large stone layers it recommends to
adjust the gripping depth a little lower, so that the steel-
lamellas grip in the lowest range of the stone layer.
Otherwise it exist the danger that the stone layer breaks
out.
½
24 / 35
Fig. 20
GB