Cameo OPUS SP5 PLUS Manual De Usuario página 18

STAND ALONE MODES (Stand Alone)
Starting from the main display, press ENTER to enter the main menu. Use the and controls to
select the control menu Control and press ENTER. Using and , now select the menu item "Stand
Alone" and confirm by pressing ENTER. Now select one of the three stand-alone modes using the
and controls and confirm with ENTER.
STANDALONE STATIC MODE (Static)
The Static mode allows PAN, Tilt, Dimmer, Strobe, Colour Wheel and Gobo Wheel etc. to be
adjusted directly on the device with values between 000 to 255, similar to a DMX control unit. In
this way, an individual scene can be created without an additional DMX controller. After you have
selected the "Static" operating mode, as previously described under "STAND ALONE OPERATING
MODES", the settings can be made as desired. The submenu items correspond to channels 1 to
50 in 50-channel extended DMX mode (see DMX CONTROL, select submenu item with UP and
DOWN, change value with LEFT and RIGHT, confirm with ENTER). Press MODE repeatedly to return
to the main display.
STAND ALONE OPERATION MODE AUTO PROGRAMS (Auto Prog)
The 4 different auto programmes (Program 1 - 4) each consist of fixed programmed head mo-
vements, gobo and colour changes etc., the running speed can be set separately. As previously
described under "STAND ALONE OPERATING MODES", select the Auto operating mode, confirm
with ENTER, select the desired Auto programme using UP and DOWN, confirm with ENTER and
now change the value for the running speed from 000 to 100 as desired using LEFT and RIGHT.
Confirm with ENTER. Press MODE repeatedly to return to the main display.
18