Soehnle Professional 9241 Instrucciones De Manejo página 15

Totalising
After the weighing product has been placed on the scale,
press the
ACC 1 appears on the display for 2 seconds.
Remove the weighing product and wait until the display
XX
settles.
Place the next weighing product on the scale. Press the
ACC 2 appears on the display for 2 seconds, etc.
Up to 99 individual weights can be totalised.
Total memory display
After the weighing product has been placed on the scale,
press the
The number of individual weighings is first displayed, fol-
lowed by the total weight.
Clearing the total memory
To clear the total weight, press the
weight is displayed.
User Mode
The scale has 6 parameters which can be changed by the
user.
• Change the scale division in bad ambient conditions
• Set the backlight for optimum energy efficiency
• Set the I/O port (not possible)
• Print with totalising (not possible)
• Zero tracking
• Change the standard units
• Set the beep tone when checking the filter setting
Activate by pressing the
Changing the scale division
Example: 6 kg scale has 0.2 g division resolution
Setting options 0.2 / 0.5 / 1 / 2 g
Displayed as:
Increment by pressing
Backlight
No lighting
Continuous on
On when under load
Increment by pressing
key.
key again.
key.
Inc 2 / 5 / 10 / 20
ENGLISH
key when the total
and keys simultaneously
and confirm by pressing
and confirm by pressing
.
.
15