Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
When cutting the workpiece which has the dimension of "*" there might be some possibility of
the lower end of the circular saw to touch with the workpiece, even if the motor head is located
at the lower limit position. Pay attention when cutting the workpiece. For further details, refer
to "PRACTICAL APPLICATIONS" on page 23. Mount the auxiliary board on the fence surface
(Refer ( ) the thickness of auxiliary board). Refer to "5. Cutting large workpieces" on page 27
(Fig. 26).
ACCESSORIES
WARNING:
Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
STANDARD ACCESSORIES
1 12" (305 mm) TCT Saw blade
(1 piece) (For wood)
OPTIONAL ACCESSORIES...sold separately
Extension Holder and Stopper (Code No. 324369)
1
Crown molding Vise Ass'y (Code No. 321434) (Include Crown molding Stopper (L))
2
Crown molding Stopper (L) (Code No. 321374)
3
Crown molding Stopper (R) (Code No. 321373)
4
NOTE:
Accessories are subject to change without any obligation on the part of the
HITACHI.
2 Dust bag (1 piece)
For how to use, refer to page 36.
3 Vise Assembly w/knob bolt
(1 piece)
For how to use, refer to page 25.
Fig. 3
English
4 17 mm Wrench (1 piece)
5 Holder (1 piece)
For how to use, refer to page 14.
13
Publicidad
Tabla de contenido
