Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
IMPORTANT SAFETY INSTRUCTIONS
FOR USING ALL POWER TOOLS
READ ALL OF THE WARNINGS AND OPERATING INSTRUCTIONS IN THIS
MANUAL BEFORE OPERATING OR MAINTAINING THIS TOOL:
WARNING:
When using this electric tool, take all necessary precautions to minimize
the risk of electric shock or other personal injury.
In particular, always comply with the following safety rules:
1.
ALWAYS KEEP GUARDS IN PLACE and in working order.
2.
ALWAYS REMOVE ADJUSTING KEYS AND WRENCHES BEFORE STARTING TOOL.
Always confi rm that all keys and adjusting wrenches have been removed from the tool
before it is turned on.
3.
ALWAYS KEEP WORK AREA CLEAN. Avoid injuries by not cluttering the work areas and
work benches.
4.
NEVER USE TOOL IN HAZARDOUS ENVIRONMENTS. Never use the power tool in damp
or wet places and never expose it to rain. Always keep the work area well lighted.
5.
NEVER PERMIT CHILDREN OR OTHERS TO LOITER NEAR THE WORK AREA. Keep
all people (especially children) away from the work area. Always unplug unattended tools
and keep the work place tamper-proof by installing locks on the doors and on the master
switches. Always remove the lock-off button from the tool and store it in a secure place,
when the tool is not in use.
6.
NEVER FORCE THE TOOL. It will do the job better and more safely if it is operated at the
rate for which it was designed.
7.
ALWAYS USE THE RIGHT TOOLS. Never force a tool or an attachment to do a job for
which it was not designed.
8.
ALWAYS WEAR PROPER APPAREL WHEN WORKING WITH THE TOOL. Never wear
loose clothing, gloves, neckties, rings, bracelets or other jewelry which may get caught in
the moving parts. Always wear non-slip footwear, preferably with steel toes. Wear protective
hair covering to contain long hair.
9.
ALWAYS WEAR EYE PROTECTION WITH SIDE SHIELDS THAT MEETS THE
REQUIREMENTS OF ANSI STANDARD Z87.1 WHEN WORKING WITH THE TOOL TO
PREVENT EYE INJURY. Ordinary eyeglasses do not provide adequate protection because
they do not contain impact resistant safety glass. Also, use a face mask for additional safety
and wear a dust mask if the cutting operation produces dust.
10. ALWAYS SECURE THE WORKPIECE TO THE FENCE OR THE TABLE. Use clamps or a
vise to hold the workpiece in place. It is safer than using your hand and it frees both hands
to operate the tool.
4
SAFETY
Publicidad
Tabla de contenido
