Pioneer HTZ-BD52 Manual De Instrucciones página 40

40 Connecting
En
Connecting optional
Bluetooth® ADAPTER
When the Bluetooth ADAPTER (Pioneer Model
No. AS-BT100 or AS-BT200) is connected to
this unit, a product equipped with Bluetooth
wireless technology (portable cell phone,
digital music player, etc.) can be used to listen
to music wirelessly.
2
Connect a Bluetooth ADAPTER to the
ADAPTER PORT terminal on the rear panel.
*For instructions on playing the Bluetooth
wireless technology device, see Pairing the
Bluetooth ADAPTER and Bluetooth wireless
technology device on page 68.
Rear of the unit
®
Bluetooth ADAPTER
Note
• Do not move the unit while the Bluetooth ADAPTER
is connected. Doing so could cause damage or
faulty contact.
Connecting to your
Home Network
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel or the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such
as BD-LIVE interactivity and Online content
services.
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not
subject to radio frequency interference.
Please refer to the documentation for your
network device for further instructions.
Connect the player's LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable.
Note
• When plugging or unplugging the LAN cable, hold
the plug portion of the cable. When unplugging,
do not pull on the LAN cable but unplug while
pressing down on the lock.
• Do not connect a modular phone cable to the LAN
port.
• Since there are various connection configurations,
please follow the specifications of your
telecommunication carrier or internet service
provider.
• If you want to access content from PCs or DLNA
servers, this player must be connected to the same
local area network with them via a router.