Pioneer HTZ-BD52 Manual De Instrucciones página 67

Radio Operations
Be sure that FM aerial is connected. (Refer to
the page 37)
Listening to the radio
1. Press FUNCTION until FM appears in the
display window and press ENTER.
The last received station is tuned in.
2. Scanning will start when either the  or
the  button is pressed.
or
Press / repeatedly.
or
Press TUNE –/+ on the front panel of the
player repeatedly.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL + or
VOL – on the remote control repeatedly.
Presetting the radio stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until FM appears in the
display window and press ENTER.
The last received station is tuned in.
2. Select the desired frequency by using / .
3. Press PROGRAM a preset number will flash
in the display window.
4. Press / to select the preset number you
want.
5. Press PROGRAM.
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
7. You can select the stored station by
pressing / .
Deleting all the saved stations
1. Press and hold  STOP for two seconds.
[ERASE ALL] will flash up on the display
window.
2. Press  STOP to erase all of the saved radio
stations.
Improving poor FM reception
Press AUDIO on the remote control. This will
change the tuner from stereo to mono and
usually improve the reception.
Other Operating 67
En
7