Pioneer HTZ-BD52 Manual De Instrucciones página 42

42 Connecting
En
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless
router is required before connecting the player
to the network.
2
Preparation
Before setting the wireless network, you need
to:
- connect the broadband internet to the
wireless home network.
- set the access point or wireless router.
- note the SSID and security code of the
network.
1. Select [Initial Setup] d [Network] d
[Interface] d [Wireless] and press ENTER.
2. Select [Initial Setup] d [Network] d
[Wireless Setting] d [Next Screen] and
press ENTER.
3. Select [Yes] and press ENTER to continue.
The new connection settings reset the
current network settings.
4. [Wireless Setting] menu is displayed.
Use / to select [Scan]. Then select [Next]
using the / and press ENTER.
5. The player scans the all available access
points or wireless routers within range and
display them as a list. Use / to select an
access point or wireless router on the list,
and then press ENTER.
If you have security on your access point
or wireless router, verify that the WEP or
WPA key that was entered into the player
matches the router's information exactly.
You need to input the security code as
necessary.
6. How to enter the security code.
1 Select the security code section using
/ / / and press ENTER to start the
software keyboard.
2 Use / / / to select characters and
items, and then press ENTER to input.
3 Select [abc], [ABC], or [!@#$] using /
/ / to switch to lower case characters,
upper case characters, or symbols.
4 Finish entering the security code by
selecting [Enter] using / / / and
pressing ENTER.
7. Select [Next] using / / / and press
ENTER. If it connects success, it will display
connection success and IP is obtained.
8. Pressing ENTER ends [Wireless Setting].
Note
y WEP security mode generally have 4 keys
available on an access point or wireless
router's setting. If your access point or wireless
router use WEP security, enter the security
code of the key "No.1" to connect on your home
network.
y An Access Point is a device that allows you to
connect to your home network wirelessly.
[Scan] – The player scans the all available
access points or wireless routers within
range and display them as a list.
[Manual] – Your access point may not
be broadcasting its access point name
(SSID). Check your router settings through
your computer and either set your router
to broadcast SSID, or manually enter the
access point name (SSID) in [Manual].
[Auto] – If your access point or wireless
router that supports the Push Button
Configuration method, select this option
and press the Push Button on your access
point or wireless router within 120 counts.
You do not need to know the access point
name (SSID) and security code of your
access point or wireless router.
Note
y If there is no DHCP server on the network and
you want to set the IP address manually, Please
refer to "Setting the IP address". (Page 75)