Publicidad
Idiomas disponibles
Idiomas disponibles
Measure the difference in height A.
A = 10 mm
14.9 Tyre pressure
Correct tyre pressure is an
important prerequisite for alignment
of the mowing deck and
consequently for achieving a clean
cutting pattern.
Moreover, the turf may be damaged
by the tyre studs in the case of
excessively high tyre pressure.
0478 193 9905 B - EN
Remove the cap from valve (1).
● Inflate the tyres to the following tyre
pressures using a suitable air pump
with pressure gauge.
Front tyres:
0,9 - 1,2 bar
Rear tyres:
0,7 - 1,0 bar
14.10 Changing the wheels
In the case of damage (holes, cracks, cuts,
etc.) to the wheels, remove the damaged
wheel and take it to a specialised dealer.
Lifting and supporting the machine
Risk of injury!
Always secure the machine against
rolling away before lifting.
Bear in mind the heavy weight of
the machine when lifting it (see
section "Technical specifications").
(
21.)
If necessary, raise the machine with
the help of a second person or
using a jack (not included in the
standard equipment).
The brake only acts on the rear
wheels, suitable measures against
rolling away must therefore
additionally be taken when lifting
the rear axle.
Avoid damage to the machine!
When supporting, ensure that only
the axle or the rear panel of the
machine contacts the support.
Only lift the machine at suitable
components (e.g. frame, bumper,
rims, axle). Never lift or support the
machine at plastic parts.
● Park the machine on firm and level
ground.
● Stop the engine. (
12.3)
● Engage the parking brake. (
● Remove the ignition key and keep it in a
safe place.
Front axle:
A > 200 mm
Rear axle:
B > 120 mm
8.10)
99
Publicidad
