Publicidad
Idiomas disponibles
Idiomas disponibles
5 V-belt tensioner lever
6 V-belt pulley
7 Front mowing deck mounting
8 Rear mowing deck mounting
13.1 Removing the mowing deck
Risk of injury!
Prior to all operations on the
mowing deck, carefully read and
observe the section "For your
safety". (
4.)
Avoid damage to the machine!
When the mowing deck is removed,
the ride-on mower must not be
operated with the discharge chute
installed.
Remove the discharge chute so
that it cannot catch on objects
(molehills, roots, etc.) and become
damaged. (
14.5)
● Park the machine on level and solid
ground.
● Stop the engine. (
12.3)
● Remove the ignition key.
● Engage the parking brake. (
● Remove the grass catcher box.
(
12.10)
● Remove the discharge chute. (
Removing the rear V-belt cover
Danger of burns:
Allow the machine, particularly the
exhaust system, to cool down
completely before removing the
rear V-belt cover.
● Select the lowest cutting level.
0478 193 9905 B - EN
Step 1:
Remove closure screw (1) by turning
through 90° anti-clockwise.
Step 2:
Pull the rear V-belt cover (2) forwards and
8.10)
remove.
Detaching the V-belt
● Select cutting level 3.
14.5)
Press V-belt tensioner lever (5) in the
direction of the arrow (forwards) using a
suitable length of pipe and hold.
Remove V-belt (2) from V-belt pulley (6).
● After removing the V-belt, slowly
release the V-belt tensioner lever.
89
Publicidad
