Publicidad
Idiomas disponibles
Idiomas disponibles
4.3
WIRING DIAGRAMS TRH12/TRH22
FIG 4-Illustration
4.4
FUNCTIONAL CHECK
To check the appliance works correctly proceed as follows:
-
Press the start button "turn over "and check that the screw feeder rotates anti-clockwise to the
outlet opening of the TRH12/TRH22;
-
By press the reverse button "on "check the grater roller changes direction and starts turning
clockwise;
-
Using the presser lever see if the appliance automatically stops.
5
USING THE APPLIANCE
5.1
CONTROLS
FIG 5-Controls
1-Start button "on"
2-Stop button "off"
3-Reverse button
"turn over"
5.2
SETTING UP THE TRH12/TRH22 FOR USE
N.B before using the appliance makes sure all the components that can be removed are secured in
position (see fig 6)
-
Mount the mincer outlet and lock it in place using the handle on the side of the connection.
-
Mount the screw feeder, blade and disk, and then screw on the lock nut.
15
Publicidad
