WIKA 432.50 Manual De Instrucciones página 9

2. Safety
Designation
E Ex atmosphere
1 Ex marking
2 Ignition protection type
3 Suitable atmosphere
Maximum surface
4
temperature
5 EPL equipment protecti-
on level
6 Specific conditions
of use, see operating
instructions
WIKA operating instructions pressure gauge model 4 per ATEX
Marking Meaning
G For areas in which explosive gas, vapour, mist
or air mixtures are present.
D For areas in which explosive atmospheres
caused by dust can form.
Ex Standards ISO 80079-36 and ISO 80079-37
applied.
h Non-electrical equipment for use in explosive
atmospheres.
An ignition protection type is not applied to the
letter "h".
IIC Gas atmosphere group IIC.
IIIC Combustible flyings, non-conductive dust and
conductive dust.
T6 ... T1 Symbol indicating the temperature class.
The actual maximum surface temperature de-
pends not on the equipment itself, but mainly
on the operating conditions.
T85°C ... Maximum surface temperature
T450°C The actual maximum surface temperature de-
pends not on the equipment itself, but mainly
on the operating conditions.
Gb Potential ignition sources that are effective or
may become effective during normal operation
Db
and expected malfunction.
X Ambient temperature with special range. Spe-
cific conditions of use apply.
EN
9