Publicidad
Specifications.
Type
Reference number
Power input
Output
Power supply type
Oscillating frequency
Weight according to
EPTA-Procedure 01/2003
Class of protection
Oscillating angle
Emission values for sound and vibration
(Two-figure – specifications as per ISO 4871)
Measured A-weighted sound
power level L
wA
(re 1 pW), in decibels
Measuring uncertainty K
in decibels
A-weighted emission pressure
power level measured at the
workplace L
(re 20 μPa),
pA
in decibels
Measuring uncertainty K
in decibels
Measured C-weighted peak
sound pressure level at the
workplace L
, in decibels
pCpeak
Uncertainty K
in decibels
pCpeak
REMARK: The sum of the measured emission
value and respective measuring inaccuracy rep-
resents the upper limit of the values that can
occur during measuring.
Wear ear protection!
For measurement values obtained according to
the respective product standard.
Classification of BTI
application tools according
to vibration class
VC0
VC1
VC2
VC3
VC4
VC5
UM 250 ES
9 012 358
250 W
130 W
1 ~
11 000–
20 000/min
1.4 kg
II
1.6 °
Sound emission
,
wA
,
pA
Weighted
acceleration*
< 2.5 m/s
< 5 m/s
< 7 m/s
< 10 m/s
< 15 m/s
> 15 m/s
English - 7
*These values are based on a work cycle con-
sisting of no-load and full-load operation of the
same duration.
Disposal.
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools
into household waste!
According to the European Direc-
tive 2002/96/EC on waste electri-
cal and electronic equipment and
its incorporation into national law,
power tools that are no longer suitable for use
must be separately collected and sent for recov-
ery in an environmental-friendly manner.
CE conformity.
85
We declare ourselves solely responsible for this
product conforming with the following stand-
3
ards or standardised documents: EN 60 745,
EN 55 014, EN 61 000-3-2/-3-3 in accordance
with the regulations in the recommendations
2011/65/EU, 2006/42/EC and 2004/108/EEC.
74
Jürgen Dietz
General Manager
3
96
3
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
Any alterations made to the power tool will render
this declaration invalid and the guarantee will become
ineffective.
Subject to change without notice
2
2
2
2
2
2
i.V. Günter Hub
Purchasing Manager
Publicidad
