Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING ON THE WALL
Measure the distance between the ho-
les in the side caps (two per cap) and
transfer them to the wall.
Drill the holes at the markings with the
holes with the right diameter for the
mounting material and make sure that
the drill holes are absolutely level (Use
a spirit level!).
Use dowels and screws that are suitab-
le for your mounting surface. Screw the
two upper screws into the wall most of
the way and hang the screen from both
sides into the upper hole.*
Make sure that the screen is installed
straight and level. Tighten the screws
and then tighten the lower screws on
both sides of the screen.
Caution:
Do
not
screws! If you notice cracks in the caps
they must be replaced! The screen
must not be used with cracked caps.
Please ensure that the metal shims are
also used for wall and ceiling mounting,
otherwise a safe installation cannot be
guaranteed).
* Electric Economy series screens with a cloth width greater / equal 240 cm:
Tighten the screws - the installation is now complete.
overtighten
the
5
Publicidad
