Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL VIA THE REMOTE CONTROL
STEP 1: SAFETY CHECK (FIG. 1)
Insert the plug into the socket (ensure correct voltage). The cable must not be
laid on hot surfaces or stretched. When using an extension make sure it has the
correct specifi cation.
The wall control box must be mounted with the cable outlet on the underside.
STEP 2: EXTEND THE SCREEN (FIG. 2)
Press the downward pointing arrow
button. The screen extends and stops
automatically at the set end point.
Make sure that no objects or persons
obstruct the extension path of the
screen.
STEP 3: RETRACT THE SCREEN (FIG. 3)
Press the upward pointing arrow but-
ton. The screen retracts and stops au-
tomatically at the housing or the set
upper end point.
Make sure that no objects or persons
obstruct the retraction of the screen.
STEP 4: STOP THE SCREEN
To stop the screen manually, press the stop button between the arrows.
It is possible to set the stop points. Please request the instructions for this procedure from
your specialist dealer or directly via www.celexon.com
7
Publicidad
