Starting Procedure; Selecting Files From The File Name List; Aux Source - Pioneer AVH-X595BT Manual De Instrucciones

Bluetooth audio player
Selects a file from the list.
*1
 Refer to Selecting files from the file name list on
page 32
Switches among the Bluetooth devices when the
*2
devices are connected to this product via Bluetooth.
 Refer to Switching the connected Bluetooth device
on page 12
p Depending on the Bluetooth audio player connected to this
product, the available operations with this product may be
limited to the following two levels:
— A2DP (Advanced Audio Distribution Profile): Only playing
back songs on your audio player is possible.
— A2DP and AVRCP (Audio/Video Remote Control Profile):
Playing back, pausing, selecting songs, etc., are possible.
p By pressing the or button, you can also skip files
forwards or backwards.
p By pressing and hold the or
perform fast reverse or fast forwards.
p Depending on the Bluetooth device connected to this prod-
uct, the available operations with this product may be limited
or differ from the descriptions in this manual.
p While you are listening to songs on your Bluetooth device,
please refrain from operating the phone function as much as
possible. If you try operating, the signal may cause noise for
song playback.
p When you are talking on the Bluetooth device connected to
this product via Bluetooth, it may pause playback.

Starting procedure

p Before using the Bluetooth audio player, register and con-
nect the device to this product.
 Refer to Registering your Bluetooth devices on page 11
1 Pull out the connecting cable for using
AppRadioMode.
p You cannot use Bluetooth device when the connecting cable
for using AppRadioMode is connected.
2 Display the "System" setting screen.
3 Touch [AV Source Settings].
4 Confirm that "Bluetooth Audio" is turned on.
5 Display the "AV source selection" screen.
32
6 Touch [Bluetooth Audio] on the AV source
selection screen.
Selecting files from the file
name list
p This function is available only when the AVRCP version of the
Bluetooth device is 1.4 or higher.
1 Touch
2 Touch a file or a folder on the list to play back.
button, you can also
.

AUX source

AUX
21
6/10
Full
Switches between the video input
and the sound input.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
 Refer to External video component and the display on page
51
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Touch [Input/Output settings].
3 Confirm that "AUX Input" is turned on.
4 Display the "AV source selection" screen.
5 Touch [AUX].
The image is displayed on the screen.
48