Publicidad
Idiomas disponibles
Idiomas disponibles
A. Motor
B. Fence
C. Throat Plate
D. Miter Lock Knob
E. Support Extensions
F.
Miter Scale with Positive Stops
G. Horizontal Work Clamp
H. Base
I.
Mounting Holes
J. On-Board Wrench
K. Work Table
L. Bevel Lock Knob
M. Dust Bag
N. Upper and Lower Blade Guards
O. Blade (not visible)
P.
Power Switch
Q. Spindle lock
R. Slide Lock Knob
S. Electric Brake (not shown)
T.
Laser Guide (not shown)
KNOW YOUR COMPOUND MITER SAW
Refer to Figure 1.
Using this tool safely requires that you understand the
information provided in this operator's manual, as well as
the project you are attempting. Before using this product,
familiarize yourself with all operating features and safety
rules.
A. 15-AMP MOTOR: This tool features a powerful
15-amp motor with all ball bearings and externally
accessible brushes for ease of servicing.
B. ADJUSTABLE FENCE: The miter fence supports
the workpiece when making all cuts. The extension
length is adjustable.
C. THROAT PLATE: The throat plate supports the
workpiece and provides a safe working surface.
D. MITER LOCK: The miter lock knob securely locks the
saw at desired miter angles.
E. SUPPORT EXTENSIONS: Use these to help support
large pieces when necessary.
F.
MITER SCALE WITH POSITIVE STOPS: Positive
stops have been provided at 0°, 15°, 22.5°, 31.6°,
and 45°. The blade stops have been provided on
both the left and right side of the miter table.
FEATURES
R
J
N
Q
G
O
K
E
C
D
F
G. HORIZONTAL WORK CLAMP: The horizontal work
clamp helps to position and secure the workpiece
to the fence, ensuring safer operation and more
accurate cuts.
H. BASE: Supports the tool and features mounting
holes.
I.
MOUNTING HOLES: Enables you to securely mount
the tool to a stable surface.
J. BLADE WRENCH STORAGE: The included blade
wrench features a Phillips screwdriver at one
end and a hex key at the other. Use the hex key
when installing or removing blade and the Phillips
screwdriver when removing or loosening screws.
When not in use, the wrench can be stored in the
base of the saw.
K. WORK TABLE: Sturdy, large die-cast aluminum work
table provides a level and sturdy work surface.
L. BEVEL LOCK: the bevel lock knob secures the
saw at the desired angle for bevel cuts. There are 2
positive stop screws underneath the bevel lock knob
for making fine adjustments at 0° and 45°.
M. DUST COLLECTION BAG: The included dust bag
attaches and detached quickly with the integrated
clamp for easy cleaning.
7
P
A
B
H
FIGURE 1
M
L
I
x4
E
Publicidad
