Publicidad
Idiomas disponibles
Idiomas disponibles
N. UPPER AND LOWER BLADE GUARDS: The lower
blade guard is made of shock-resistant, see-through
plastic that provides protection from each side of the
blade. It automatically retracts over the upper blade
guard as the saw is lowered into the workpiece.
O. 12-INCH BLADE: A 12" blade is included with the
compound miter saw. It will cut materials up to 4"
thick or 14" wide, depending upon the angle at which
the cut is being made.
P.
POWER SWITCH: The saw blade is activated by
an easy-to-use trigger switch. When not in use the
saw should be disconnected from the power supply
and switch locked in the off position using a padlock
(not included) inserted through the hole in the switch
trigger. A lock with a long shackle may be used.
•
Check shipping carton and machine for damage before unpacking. Carefully remove packaging materials, parts and
machine from shipping carton. Always check for and remove protective shipping materials around motor and moving
parts. Lay out all parts on a clean work surface.
•
Compare the items to inventory figures, verify that all items are accounted for before discarding the shipping
carton. Report any missing or damaged parts, please call our Customer Care Center at 800-223-7278. Prior to
tool assembly and use, read this manual to familiarize yourself with proper assembly, maintenance and safety
procedures.
•
If any parts are missing, do not attempt to plug in the power cord and turn the power on. The saw should only be
energized after all parts have been located and correctly assembled.
A
CONTENT DESCRIPTION (QTY)
A. SHOPMASTER S26-271L 12-inch Sliding Compound
Miter Saw
B. Dust Collection Bag (1)
C. Horizontal Work Clamp (1)
FEATURES
The padlock and key should be stored in separate
locations.
Q. SPINDLE LOCK BUTTON: The spindle lock button
locks the spindle preventing the blade from rotating
while removing or installing the blade screw.
R. SLIDE LOCK: This allows head to move front to rear
for cutting wide material up to 14" wide.
S. ELECTRIC BRAKE: An electric brake has been
provided to more quickly stop blade rotation after the
switch is released. (not shown)
T.
LASER GUIDE: For more accurate cuts, a laser guide
is included with your miter saw. When used properly,
the laser guide makes accurate, precision cutting
simple and easy. (not shown)
UNPACKING
B
D
FIGURE 2
D. Blade Wrench (1)
E. Support Extensions (2)
8
C
E
Publicidad
