Abbott FreeStyle Libre3 Manual Del Usuario página 22

enabled, you will see a notification when the Sensor is ready.
Note: If you have an active Sensor and want to start a new Sensor, go to the
Menu and tap Start New Sensor
Android:
1. From the App Home Screen, scan the Sensor with the BACK of your phone to
start it. You will receive a tone and vibration after you have successfully started
the Sensor. If your phone's volume is turned o", you will not hear the tone.
Note: Each phone model is di"erent. Touch the Sensor with your phone or
move your phone around slowly until you learn how to scan.
2. The Sensor can be used to check your glucose after 60 minutes. While the
Sensor is starting up, you can navigate away from the App. If notifications are
enabled, you will see a notification when the Sensor is ready.
Note: If you have an active Sensor and want to start a new Sensor, go to the
Menu and tap Start New Sensor
Note:
If you need help, tap HOW TO SCAN A SENSOR to view an in-app tutorial. You
can also access this later by going to the Main Menu and then tapping Help.
.
.
ART42490-004_rev-A 10:30am 04-May-22