Publicidad
!
Make sure to mount the bracket in the correct mounting holes on the outlet box!
With the fan in the upright position, remove the protective covering from the extension tube� Slide the wiring cover (a)
A
and wiring cover trim (b) over the extension tube, resting them on the fan hub�
Ensure wiring has been routed to the fan site� Secure the mounting bracket (c) to the outlet box with the hardware
B
supplied with the outlet box� Seat the rubber bushing (d) in the eye of the mounting bracket�
Loosely install the mount brace brackets (e) with the provided hardware� The bolt should be inserted in the middle bolt
C
hole on the brackets� Do not fully tighten the hardware�
Hardware:
f. 6 x 1 x 25 mm Socket cap screw
g. M6 x 1 Nylock Nut
HAIKU
®
BY BIG ASS FANS
WWW.BIGASSFANS.COM/TECHNICAL-SUPPORT
●
(877) BIG FANS
●
A2
cont.
21
Publicidad
