Publicidad
As you remove the fan from its packaging, make sure you are not missing any components required for assembly and
operation� If you ordered multiple fans, be sure to keep the components of each fan together! Certain fan components are not
interchangeable�
a
Rubber bushing
b
Mounting bracket
c
(2) Mounting brace bracket
d
Wiring cover
e
Wiring cover trim
Lower cover
f
g
(3) Airfoil
Motor hub
h
†
If the EMI filter is included with your fan (country dependent), please install it with your fan�
††
If installing the fan to a junction box, only one (1) bolt and one (1) nut are needed�
†††
Safety cable is not shown�
††††
Haiku 52 and Haiku 60 only�
†††††
Haiku Bamboo and Haiku 84 only�
HAIKU
®
BY BIG ASS FANS
WWW.BIGASSFANS.COM/TECHNICAL-SUPPORT
●
i
Remote control
j
EMI filter (not shown)†
k
Mounting hardware
• (2) M6 x 1 x 25 mm socket cap screw††
• (2) M6 x 1 nylock nut††
• M8 Bolt
• 8 mm flat washer
• 8 mm lock washer
• M8 nut
• 2 mm x 2 mm split pin
• Safety cable shackle†††
(877) BIG FANS
●
l
Airfoil hardware
• (6) M5 airfoil screw
• (6) 5 mm lock washer††††
• (6) Airfoil grommet†††††
m
Wiring hardware
• (4) Wire nut
• (2) Wiring cover screw
5
Publicidad
