Working With The Tool; Systainer - Festool ROTEX RO 125 FEQ Manual De Instrucciones

8.1
A
B 9-1
simply pressed onto the polishing pad and pulled
off after use.

Working with the tool

such a manner that it cannot move while being
sanded.
too much pressure! The best sanding results
8.2
are achieved when applying moderate pressure.
Sanding performance and quality depend primar-
ily on the choice of the right abrasive.
For safe guidance, hold the tool with one hand on
the motor housing (8.2) and the other hand on the
gear head (8.1).
Tables A and B show the settings we recommend
for different sanding and polishing work.

Systainer

9
Many Festool products are shipped in a unique
system container, called "Systainer".
This provides protection and storage for the tool
and accessories. The Systainers are stackable
and can be connected together. They also can be
conntected atop Festool CT dust extractors.
To open the Systainer:
– Turn the T-loc [9-1] to the position
To lock the Systainer:
– Turn the T-loc [9-1] to the position
To connect two Systainers:
– Place one Systainer on the top of the other
(Fig. 9 A).
– Turn the T-loc [9-1] to the position
(Fig. 9 B).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.
9
Always secure the workpiece in
Never overload the tool by using
.
.
or