Laser Properties; Battery Time; Before Use; Switching The Laser Range Meter On Or Off - Hilti PD-I Manual Del Usuario

Operating temperature
Storage temperature
4.2

Laser properties

Laser type
Laser class in accordance with EN 60825-1:2014
Range (ideal conditions)
Accuracy (ideal conditions) ±
4.3

Battery time

Battery time (measurements)
Automatic switch-off (laser)
Automatic switch-off (product)
4.4 Bluetooth Smart
Version
Range
5

Before use

5.1 Inserting the batteries
Do not use damaged batteries.
Make sure that battery polarity is correct.
Change the batteries as soon as the
1. Flip the contact spike forward.
2. Open the battery compartment.
3. Insert the batteries.
4. Close the battery compartment and flip the contact spike back to the closed position.
5.2

Switching the laser range meter on or off

CAUTION
Risk of injury! Do not direct the laser beam toward persons.
▶ Never look directly into the source of the laser beam. In the event of direct eye contact, close your eyes
and move your head out of the path of the laser beam.
1. Press the
button to switch the laser range meter on.
2. Press the
button and hold it down for 2 seconds to switch the laser range meter off.
5.3 Undo
1. Take a measurement.
6 English
2
indicator lights up, and always change the batteries as a pair.
14 ℉ ... 122 ℉
(−10 ℃ ... 50 ℃)
−13 ℉ ... 158 ℉
(−25 ℃ ... 70 ℃)
635 nm | < 1 mW
Laser class 2
0 ft - 2.0 in ... 328 ft
(0.05 m ... 100 m)
0.06 in
(1.5 mm)
≈ 10,000
after 90 seconds
after 180 seconds
v4.0
< 32 ft - 10 in
(< 10 m)
2222191
*2222191*