Dymo Rhino 5200 Guia De Inicio Rapido página 4

Inserting the Label Cartridge
Your label maker uses DYMO IND label cartridges, available in widths of 6 mm, 9 mm,
12 mm, or 19 mm. Visit www.dymo.com for information about purchasing label cartridges.
Caution! Cutter blade is extremely sharp. While replacing the label cartridge, keep
fingers and other body parts away from cutter blade and do not press the cutter
button.
To insert the label cartridge
1 Gently lift the label cartridge door on the
back of the printer.
2 Make sure the label and ribbon are taut
across the mouth of the cartridge and
that the label passes between the label
guides.
If necessary, turn the ribbon rewind
spool clockwise to tighten the ribbon.
3 Insert the cartridge with the label and
ribbon positioned between the label
guides.
4 Press firmly on the cartridge until the
cartridge snaps into place.
To avoid label jams, make sure both
sides of the label cartridge snap into
place.
5 Close the label cartridge door.
Label guides
2
Ribbon
rewind spool