Pioneer N-50AE Manual De Instrucciones página 15

> Before Start > Part Names
USB Storage Device/HDD
Playback
1
2
14
> Install > Initial Setup
a
d
> Playback
Supplementary information | Advanced Setup | Others
Basic operations
b
You can play music files by connecting a USB storage
device or HDD (hard disk drive) to the USB port on the front
or rear of the unit.
c
0 The USB port on the front supports a maximum 5 V/0.5 A
power supply. If the HDD requires more than this,
connect to the USB port (maximum 5 V/1 A) on the rear
of the unit.
1. Turn the unit on.
2. Press USB FRONT or USB REAR.
e
3. Plug your USB storage device or HDD into the USB port
f
on the front or rear.
4. Folders and music files are displayed on the display
when loading is complete.
5. Select the folder or music file with the cursors (d) of the
remote controller and press ENTER (e) to confirm. To
return to the previous display, press RETURN (f).
6. Use play buttons (c) to stop play or choose tracks to play.
0 The display of album name, artist name, and album art is
supported with MP3/WMA/Apple Lossless/FLAC/AAC/
USB Front
USB Front
No Storage
USB Front
USB Front
USB Storage
E
N