Publicidad
Idiomas disponibles
Idiomas disponibles
> Before Start
> Part Names
Rear Panel
(N-50AE)
1. ANALOG OUT jacks: Use the supplied analog audio cable to connect an integrated
amplifier, for example.
2. Wireless antenna: Erect this to connect wirelessly. The diagram shows the movable range
for the wireless antenna. Do not try to force it beyond this range otherwise you may break
it.
3. DIGITAL OUT OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable
to connect an integrated amplifier, for example.
4. DIGITAL IN OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable to
connect a CD player, for example.
5. AC IN: Connect the supplied power cord.
6. CONTROL OUT jack: By connecting Pioneer brand amplifiers and CD players,
centralized control is possible, for example you can control the amplifiers and CD players
from the Pioneer Remote App.
7. USB DAC port: Use a USB cable (A—B type) to connect a computer.
8. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You
can also supply power (maximum 5 V/1 A) to USB devices with a USB cable. It is also
possible to save or delete music files on the USB HDD with a computer over the network.
6
> Install
> Initial Setup
> Playback
Supplementary information | Advanced Setup | Others
(
P21)
9. NETWORK jack: Connect to the network with an ethernet cable.
90°
180°
E
N
Publicidad
