30
Downloaded from:
https://www.usersmanualguide.com/
PLAY/PAUSE
STOP
FF
REW
POWER
Tape counter
M 0:00:00
PLAYBACK
NOTE:
Make sure you connect your camcorder as directed in
"BASIC CONNECTIONS" (
pg. 29 ).
LOAD A CASSETTE
1
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
SELECT MODE
2
Set the power switch to PLAY. The Power On
indicator lights.
PLAYBACK
3
Press PLAY/PAUSE. The playback picture appears in
the viewfinder and the connected TV.
STOP PLAYBACK
4
Press STOP.
Rewind or Fast-forward the tape
Press REW to rewind, or FF to fast-forward the tape
during Stop mode.
NOTE:
The camcorder shuts off automatically after about 5
minutes in STOP mode. To turn on again, set the power
switch to POWER OFF, then to PLAY.
Basic Playback