Publicidad
Idiomas disponibles
Idiomas disponibles
Contents
IMPORTANT SAFETY INSTRUC-
TIONS ................................................
General notes ....................................
Environmental protection ...................
Hazard levels .....................................
Intended use ......................................
Overview of the device.......................
Start-up ..............................................
Operation ...........................................
Cleaning methods .............................. 10
Transport............................................
Storage ..............................................
Care and service................................
Troubleshooting guide........................
Warranty............................................. 12
Accessories and spare parts.............. 12
Technical data .................................... 13
IMPORTANT
SAFETY
INSTRUCTIONS
When using an electrical machine, ba-
sic precautions should always be fol-
lowed, including the following:
READ ALL IN-
STRUCTIONS BE-
FORE USING
THIS MACHINE
● Inform your dealer immediately if
there is any shipping damage.
● Completely remove the accessories
from the box.
● The machine is not suitable for suck-
ing up hazardous dusts as asbestos.
Please consult your KÄRCHER
branch or your KÄRCHER dealer
with regard to such applications.
● Only operate the appliance from a
grounded outlet. Refer to the Tech-
nical data for the necessary main
5
fuse.
6
SAVE THESE IN-
7
7
STRUCTIONS
7
7
This appliance is intended for com-
8
9
mercial use.
SAFETY IN-
11
11
STRUCTIONS
11
WARNING
11
To reduce the risk of fire, electric
shock, or injury:
1 DISCONNECT APPLIANCE FROM
POWER CIRCUIT before removing
the cover, performing maintenance
work, and when not in use.
2 DO NOT LEAVE the machine unat-
tended when plugged in.
3 ALWAYS CHECK THE POWER
SUPPLY CORD for damage or signs
of any aging before each use.
4 DO NOT PULL OR CARRY APPLI-
ANCE BY CORD. Do not use cord
as a handle. Keep cord away from
heated surfaces or fire. Do not close
door on cord or pull cord around
sharp edges.
5 KEEP CORD AWAY FROM HEAT
AND OIL. Do not leave cord lying
around after job is complete. It can
become a tripping hazard.
6 DO NOT RUN MACHINE OVER
CORD.
7 TURN SWITCH TO OFF before un-
plugging power supply cord.
8 DO NOT UNPLUG BY PULLING
CORD. To unplug, grasp plug, not
cord.
9 DO NOT GRASP PLUG WITH WET
HANDS.
English
5
Publicidad
