dormakaba LA GARD 700 Serie Guia Del Usuario página 30

Functions
Open Lock with Override Time Delay
w/ Combination
Override Time Delay with key fob
Reset lock via Master Combo
Set Keypad Backlight On/Off
Set Buzzer On/Off
Set Combination Length
Force Combination Change
Firmware Update
Configure Auto Open
Configure Remote Input Signal
3.4.3 Assigning User IDs and Privileges
You can add Users and Edit their User Privileges using Display Keypads, Non-Display Keypads, or using a PC link
to the LA GARD Software. The following section details the Keypad instructions for adding users.
Note: The forced-change-on-first-use rule applies to all non-Master users.
3.4.3.1 Add User – Display Keypad
Follow these steps to add a User on a Display Keypad:
1. Enter an Authorized User ID and Combination.
2. Navigate through the Main Menu and select "Users".
3. From the sub-menu, select "Add".
4. Input a new User ID.
5. Select a User Type between Standard User and Manager.
6. Input a Combination with the Keypad.
Note: When attempting to open a lock for the first time, the User may be required to change their
combination. The new Combination must be different from the old Combination. The User is advised to
use a strong combination.
7. "Confirm" appears on screen. Input the same Combination from the previous step.
8. "Enroll FOB?" appears on screen. Select Yes or No.
Master
Yes (default)
Yes (default)
Yes (default)
Yes (default)
Yes (default)
Yes (default)
Yes (default)
Yes (default)
dormakaba USA Inc. System User Guide 7040.1121 Rev E2 10/22 | 28
Manager Standard User
Requires Access
Yes (default)
Requires TDO
Privilege with TDO
Yes (default)
Yes (default)
Yes (default)
Yes (default)
Privilege
Fob