dormakaba LA GARD 700 Serie Guia Del Usuario página 44

2. Navigate through the Main Menu and select "System".
3. Select "Locks" from the sub-menu.
4. Select "TimeDelay".
a)
For multi-lock systems, select the corresponding lock number on the keypad
5. To change the TimeDelay period, do the following:
a)
Select "ConfigureTimes"
b)
Select "Delay Period"
c)
Use the keypad to input a new Time Delay (between 00 [Disabled] and 99 minutes)
Note: For a multi-lock setup, repeat Steps 1 through 4 for each safe lock.
d)
"Success TD Updated" appears on screen and the Keypad will beep three times and flash a green
LED once complete
6. To change the Confirm Window time (the time frame in which the safe lock can be opened), do the
following:
a)
Select "TimeDelay"
i. For multi-lock systems, select the corresponding lock number on the keypad
b)
Select "ConfigureTimes"
c)
Select "ConfirmWindow"
d)
Use the keypad to input a new Confirm Window time (between 01 and 60 minutes)
Note: For a multi-lock setup, repeat Steps 5a through 5d for each safe lock.
e)
"Success TD Updated" appears on screen and the Keypad will beep three times and flash a green
LED once complete
3.14.1.2 Time Delay Count Mode – Display Keypad
For Keypads with a display, there is an option to configure the time display for their respective time delay
feature. Select one of the following options:
1. Off.
2. Count Up.
3. Count Down.
Follow these steps to set the options:
1. Enter an Authorized User ID and Combination.
2. Navigate through the Main Menu and select "System".
3. Select "TD Cnt Mode" from the sub-menu.
4. Select either "Delay Period" or "Confirm Window".
5. Select one of the following choices and press the <return key> (←):
a. "Off"
i. the time remaining or accumulated will not display; only information on what period it is
b. Count Up
i. the count will start from 00:00 and count up until the period expires
c. Count Down
i. the time will start at the period length and count down to 00:00
in will be displayed
dormakaba USA Inc. System User Guide 7040.1121 Rev E2 10/22 | 42