Descargar Imprimir esta página

Fanimation LEVON MAD7912B Serie Manual página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Assemble Your Ceiling Fan Blades and Cap (Continued)
3. Remove the six screws in the motor assembly
and retain the screws for reassembly in steps 4
and 5. (Figure 3)
4. Attach the adapter-switch cup to the support
flange using three of the previously removed six
screws and fully tighten. (Figure 4)
5. Attach the inner-switch cup to the support flange
using the remaining three screws and fully tighten.
(Figure 5)
6. Assemble the cover-switch cup assembly to the
inner-switch cup by
twisting in a clockwise direction.
(Figure 6)
Motor
Assembly
Adapter-Switch Cup
Inner-Switch
Cup
Inner-Switch
Cup
cover-switch
cup assembly
13
Figure 3
Figure 4
Figure 5
Figure 6

Publicidad

loading