Publicidad
Idiomas disponibles
Idiomas disponibles
INFORMATION ON ASSEMBLY
•
The product should be carefully assembled by a responsible adult. Ask for the assistance of
another, technically-skilled person in case of doubt.
•
Before beginning assembly of the product, read all assembly steps carefully and review
the diagram.
•
Remove all packaging materials and lay out all the parts. This will give you a good overview
and simplify assembly. Shield the assembly surface from lth and scratching by laying down
suitable padding.
•
Check the components against the components list to make sure all are present. Do not
dispose of all packaging materials until assembly is completed.
•
Please note that there is always a risk of injury when using tools to carry out manual tasks.
Therefore, please exercise caution when assembling this product.
•
Make sure your work environment is hazard-free. For example, do not leave any tools lying
around. Place the packaging materials somewhere where they will not pose any hazards
during assembly. Packaging foil or plastic bags pose a su ocation hazard for children!
•
After assembling the product according to the instructions, make sure that all screws, bolts,
and nuts are installed correctly and tightened.
•
If necessary, lay out protective padding (not included) beneath the product to protect your
oor as there is no guarantee that, for instance, the rubber feet will not leave marks behind.
•
Some of the screws and nuts are self-locking. This mechanism may be damaged if they
are loosened. To ensure the screws/nuts hold tightly, check them before assembly and, if
necessary, coat them in a securing lacquer or use new self-locking hardware (available in
a building supplies store).
•
The user can undertake no measures to modify the product to 50 or 60 Hz. The product
switches automatically to 50 or 60 Hz.
NOTICE: HIGH WEAR PARTS
•
Always check the product for damage and wear before use. The product may only be used
in impeccable condition.
•
The safety level of the product can be maintained only when it is regularly checked for
damage and wear. If any components of the product show signs of damage, cease use of
the product immediately.
•
Only use original replacement parts.
41
Publicidad
