Sportplus SP-ET-9600-R-iE Manual De Instrucciones página 67

11. MAINTENANCE, CLEANING AND CARE
• After the assembly and before using the product, always make sure that all screws/nuts are
fully and correctly tightened.
• Clean the unit regularly with a slightly damp cloth and a mild cleaning agent.
• This is especially important for the seat and the handles, as these parts are in contact with
parts of your body during the entirety of training.
• Lubricate the bearing with commercially available grease at least once a year.
TRANSPORT
• Due to its heavy dead weight, we recommend asking a second person for help when
transporting the product. Proceed as follows: Put one foot on the front stand, hold the
product by the xed handlebar located underneath the training computer, and then tilt
the product so that it slides on the transport rollers. To put down the product, put one foot
on the front stand again and gently lower the product to the oor.
Caution! The transport rollers can cause scratching or similar on parquet oors or other
•
softwood surfaces. Always place the product on a cloth or mat, and move the product
using the cloth/mat. The retailer or manufacturer is not liable for any damage caused by
nonobservance!
12. NOTES ON DISPOSAL
Packaging materials are raw materials and can be recycled. Separate the packaging
materials correctly and dispose of them properly in the interest of the environment.
Your local administration can provide additional information.
Used products do not belong in household waste!
Dispose of used products properly! Doing so helps ful ll our responsibility to protect
the environment.
Your local administration can provide information on collection points and opening
hours.
DECLARATION OF CONFORMITY
Latupo GmbH hereby declares that this product SP-ET-9600-iE, when placed on the market,
ful lls the basis requirements and other relevant provisions of guideline 2014/53/EU. For the
complete declaration of conformity, please go to:
www.sportplus.de/konformitaetserklaerung
67